All times are UTC


Post new topic  Reply to topic  [ 1 post ] 
Author Message
 Post subject: Zetec stand alone
PostPosted: Sun Dec 09, 2012 10:14 pm 
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 664
This crowd are offering a stand alone set up for the ford 4 pots and vauxhal ... nents.html

Ford Zetec 1.8 2.0 ECU

ECU complete with a basic loom to fit the Ford Zetec 1.8 2.0 silver and black top engines. This is all you need to get your engine running correctly with either our inlet manifold kit or even Weber DCOE carbs.

Suitable for road cars, kit cars, hotrods, lightning rods, bangers, super stox and almost any formula where the Zetec engine can be used but only with carburettors.

You will get a new fully mappable ecu, software disc and instructions along with new loom and plugs to fit directly on to your Zetec engine. All that you need to do is connect the coil, crankshaft sensor, an earth and switched ignition live. That's it !! No more, nothing!! You don't even need to find a fuse, it's all included in the loom. No spending hours going round the breakers trying to find other parts that do not work correctly. There is also a wire for rev counter connected if your using one.

ECU comes with a map for a std engine, however, we would strongly recommend you have your engine dyno or rolling road tested to optimize settings for your engine spec. This gives you the ability to adjust the ignition timing and advance curve as if it had a distributor fitted but without getting your hands dirty. There is an infinitely adjustable rev limiter with soft or hard cut.

This is our basic kit, if you require something more complex for your specific conversion please ask.

Also available to suit Vauxhall X14XE and X16XE engines using our cast inlet manifold and twin choke carb kits.


Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Copyright 2016: Roadster Builders


Powered by phpBB® Forum Software © phpBB Limited