All times are UTC

 




Post new topic  Reply to topic  [ 65 posts ]  Go to page Previous 1 2 3 4 5 6 7 Next
Author Message
PostPosted: Thu Jul 03, 2014 5:27 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
Quote:
You got your worktops dirty :roll: :lol:

Is that better ? :lol:

Image


Top
   
PostPosted: Sun Jul 20, 2014 8:52 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
I had finally got the rad brackets sorted out ( mk4 :o ) when I spotted these 16" fans on the bay of thieves , anyway they fit the rad really well and with the mounting holes being so close to the rad brackets it seems a shame not to incorporate them at the same time. So its going to be mk5 rad bracket/fan mount combo :D

Image


Image


Image


I just did not like the look of the fitting kit that goes through the fins of the rad.

Image


Top
   
PostPosted: Sun Jul 27, 2014 10:00 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
The guy that did my injectors for the roadster insisted I watched this :? :? :?

Bob :?

Apparently this is good :lol: :lol:


https://www.youtube.com/watch?feature=p ... 5H_1m7MlMg


Top
   
PostPosted: Mon Jul 28, 2014 10:36 am 
Offline
Site Moderator
User avatar

Joined: Sun Dec 02, 2012 3:59 pm
Posts: 1016
Name: Bruce
Location: Biggleswade
Quote:
The guy that did my injectors for the roadster insisted I watched this :? :? :?

Bob :?

Apparently this is good :lol: :lol:


https://www.youtube.com/watch?feature=p ... 5H_1m7MlMg
You really must get out more Bob :lol:

I agree about that fan fixing kit, Macgyver would be proud of that :shock:


Top
   
PostPosted: Mon Aug 04, 2014 4:05 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
Well the injectors turned up, now I need to get the throttle bodies on the mill and open up the hole from the old mechanical injectors to the new leccy ones. The other set are all new and ready to go but these are for the second car.

Image

Brand new and never fitted from 1965.

Image


And some shiny new engine mounts turned up.

Image


Top
   
PostPosted: Wed Aug 13, 2014 10:41 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
Talon sent the rear uprights, they have the hub flange turned to accommodate the rear calipers. My only concern is the hole in the middle of the upright is about 2mm bigger than the locating spigot on the bearing carrier . I will have to spin up a sleeve and push it in there to reduce it . If i dont it could put to much strain on the four bolts that hold the bearing carrier to the hub.

Bob

Image


Top
   
PostPosted: Thu Aug 14, 2014 5:36 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
The music made me press the buy it now button on the bay of thieves so I now have a dinky very nicley made pedal box from OBP complete with cylinders , reservoirs + flexi`s and balance knob for the dash :lol: It will need a very light rub with the grinder to fit between the two box sections u6 and u7.

bob

Image


Top
   
PostPosted: Thu Aug 14, 2014 9:45 pm 
Offline
User avatar

Joined: Mon Dec 17, 2012 11:22 pm
Posts: 330
Name:
Location: Coedpoeth N.Wales
Looking forward to the boys ride out soon :D :D


Top
   
PostPosted: Thu Aug 14, 2014 10:59 pm 
Offline
Site Moderator
User avatar

Joined: Sun Dec 02, 2012 3:59 pm
Posts: 1016
Name: Bruce
Location: Biggleswade
Quote:
The music made me press the buy it now button on the bay of thieves so I now have a dinky very nicley made pedal box from OBP complete with cylinders , reservoirs + flexi`s and balance knob for the dash :lol: It will need a very light rub with the grinder to fit between the two box sections u6 and u7.

bob
I thought you had some TVR pedal boxes Bob?


Top
   
PostPosted: Fri Aug 15, 2014 4:58 pm 
Offline
User avatar

Joined: Mon Dec 03, 2012 6:19 pm
Posts: 660
Name:
Quote:
Quote:
The music made me press the buy it now button on the bay of thieves so I now have a dinky very nicley made pedal box from OBP complete with cylinders , reservoirs + flexi`s and balance knob for the dash :lol: It will need a very light rub with the grinder to fit between the two box sections u6 and u7.

bob
I thought you had some TVR pedal boxes Bob?
I have Bruce but these are ready to go and the TVR ones can go on another project so nothing wasted. And they are pretty :lol:

Bob


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 65 posts ]  Go to page Previous 1 2 3 4 5 6 7 Next

All times are UTC

 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

Copyright 2016: Roadster Builders

 

Powered by phpBB® Forum Software © phpBB Limited